Fabrication of cost-effective polymer-based nanofluidic device for single molecular analysis

Jiahao Wu; Rattikan Chantiwas; Steven A. Soper; Sunggook Park

doi:10.1115/IMECE2010-38885

Fabrication of cost-effective polymer-based nanofluidic device for single molecular analysis

Jiahao Wu
, Rattikan Chantiwas
, Steven A. Soper
, Sunggook Park

Louisiana State University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

A nanochannel based single molecular sensor was fabricated in poly(methyl methacrylate) substrate by a single step imprinting process with a polymer stamp. The sensor structure consists of hierarchical multiscale patterns of an array of 90 nm (depth) 190 nm (width) 80 μm (length) nanochannels and microfluidic networks. In contrast to nanofluidic devices fabricated by high-end nanofabrication tools such as focused ion beam milling and electron beam lithography, this direct imprint process is more desirable for efficient and low cost fabrication. Moreover, due to the reduction of stress generated during imprinting, this polymer stamp imprinting process can also reduce the deformation (warping) in molded substrates, and prevent the damage of expensive nanostructured stamp as well.

Original language	English
Title of host publication	ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010
Publisher	American Society of Mechanical Engineers (ASME)
Pages	891-897
Number of pages	7
ISBN (Print)	9780791844472
DOIs	https://doi.org/10.1115/IMECE2010-38885
Publication status	Published - 2010
Externally published	Yes
Event	ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010 - Vancouver, BC, Canada Duration: 12 Nov 2010 → 18 Nov 2010

Publication series

Name	ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
Volume	10

Conference

Conference	ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010
Country/Territory	Canada
City	Vancouver, BC
Period	12/11/10 → 18/11/10

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1115/IMECE2010-38885

Cite this

Wu, J., Chantiwas, R., Soper, S. A., & Park, S. (2010). Fabrication of cost-effective polymer-based nanofluidic device for single molecular analysis. In ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010 (pp. 891-897). (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); Vol. 10). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE2010-38885

Wu, Jiahao ; Chantiwas, Rattikan ; Soper, Steven A. et al. / Fabrication of cost-effective polymer-based nanofluidic device for single molecular analysis. ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. American Society of Mechanical Engineers (ASME), 2010. pp. 891-897 (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)).

@inproceedings{1a9ea6e7c77b46b8ad519bcb862f604f,

title = "Fabrication of cost-effective polymer-based nanofluidic device for single molecular analysis",

abstract = "A nanochannel based single molecular sensor was fabricated in poly(methyl methacrylate) substrate by a single step imprinting process with a polymer stamp. The sensor structure consists of hierarchical multiscale patterns of an array of 90 nm (depth) 190 nm (width) 80 μm (length) nanochannels and microfluidic networks. In contrast to nanofluidic devices fabricated by high-end nanofabrication tools such as focused ion beam milling and electron beam lithography, this direct imprint process is more desirable for efficient and low cost fabrication. Moreover, due to the reduction of stress generated during imprinting, this polymer stamp imprinting process can also reduce the deformation (warping) in molded substrates, and prevent the damage of expensive nanostructured stamp as well.",

author = "Jiahao Wu and Rattikan Chantiwas and Soper, \{Steven A.\} and Sunggook Park",

year = "2010",

doi = "10.1115/IMECE2010-38885",

language = "English",

isbn = "9780791844472",

series = "ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)",

publisher = "American Society of Mechanical Engineers (ASME)",

pages = "891--897",

booktitle = "ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010",

note = "ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010 ; Conference date: 12-11-2010 Through 18-11-2010",

}

Wu, J, Chantiwas, R, Soper, SA & Park, S 2010, Fabrication of cost-effective polymer-based nanofluidic device for single molecular analysis. in ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 10, American Society of Mechanical Engineers (ASME), pp. 891-897, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, BC, Canada, 12/11/10. https://doi.org/10.1115/IMECE2010-38885

Fabrication of cost-effective polymer-based nanofluidic device for single molecular analysis. / Wu, Jiahao; Chantiwas, Rattikan; Soper, Steven A. et al.
ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. American Society of Mechanical Engineers (ASME), 2010. p. 891-897 (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); Vol. 10).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Fabrication of cost-effective polymer-based nanofluidic device for single molecular analysis

AU - Wu, Jiahao

AU - Chantiwas, Rattikan

AU - Soper, Steven A.

AU - Park, Sunggook

PY - 2010

Y1 - 2010

N2 - A nanochannel based single molecular sensor was fabricated in poly(methyl methacrylate) substrate by a single step imprinting process with a polymer stamp. The sensor structure consists of hierarchical multiscale patterns of an array of 90 nm (depth) 190 nm (width) 80 μm (length) nanochannels and microfluidic networks. In contrast to nanofluidic devices fabricated by high-end nanofabrication tools such as focused ion beam milling and electron beam lithography, this direct imprint process is more desirable for efficient and low cost fabrication. Moreover, due to the reduction of stress generated during imprinting, this polymer stamp imprinting process can also reduce the deformation (warping) in molded substrates, and prevent the damage of expensive nanostructured stamp as well.

AB - A nanochannel based single molecular sensor was fabricated in poly(methyl methacrylate) substrate by a single step imprinting process with a polymer stamp. The sensor structure consists of hierarchical multiscale patterns of an array of 90 nm (depth) 190 nm (width) 80 μm (length) nanochannels and microfluidic networks. In contrast to nanofluidic devices fabricated by high-end nanofabrication tools such as focused ion beam milling and electron beam lithography, this direct imprint process is more desirable for efficient and low cost fabrication. Moreover, due to the reduction of stress generated during imprinting, this polymer stamp imprinting process can also reduce the deformation (warping) in molded substrates, and prevent the damage of expensive nanostructured stamp as well.

UR - https://www.scopus.com/pages/publications/84881426211

U2 - 10.1115/IMECE2010-38885

DO - 10.1115/IMECE2010-38885

M3 - Conference contribution

AN - SCOPUS:84881426211

SN - 9780791844472

T3 - ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

SP - 891

EP - 897

BT - ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010

PB - American Society of Mechanical Engineers (ASME)

T2 - ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010

Y2 - 12 November 2010 through 18 November 2010

ER -

Wu J, Chantiwas R, Soper SA, Park S. Fabrication of cost-effective polymer-based nanofluidic device for single molecular analysis. In ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. American Society of Mechanical Engineers (ASME). 2010. p. 891-897. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)). doi: 10.1115/IMECE2010-38885

Fabrication of cost-effective polymer-based nanofluidic device for single molecular analysis

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this