Effect of surface preparation by non-directional grinding on properties of AISI D2 plasma-nitride layer

S. Rajsiri; T. Kraiha; L. Plangklang; U. Chairue

doi:10.4028/www.scientific.net/AMM.376.190

Effect of surface preparation by non-directional grinding on properties of AISI D2 plasma-nitride layer

S. Rajsiri
, T. Kraiha
, L. Plangklang
, U. Chairue

Department of Industrial Engineering

Mahidol University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This research studies the properties of plasma-nitride coating on AISI D2 tool steels prepared by non-directional grinding at various finishing. In the manufacturing process, the AISI D2 was machined to size and hardened with a typical hardening process. In addition, its surface was treated with plasma nitriding. Various levels of roughness were produced as well as possible affects on the nitride coating properties. In this study, the following five conditions of grinding were performed on the hardened specimens: 1-μm diamond particle and four SiC grinding papers: P100, P240, P800, and P2500. The surface finishing with at least 0.023-μm roughness value (P800 grinding) provided a plasma-nitride layer with a moderately good hardness profile and a thick nitride layer compared with other finer finishing. This finishing process was also more economical requiring less time and manpower to create than others. Overall, this study suggests that finer surface finishing has a tendency to significantly improve the tool steels hardness profile and hardened depth.

Original language	English
Title of host publication	Materials and Diverse Technologies in Industry and Manufacture
Pages	190-194
Number of pages	5
DOIs	https://doi.org/10.4028/www.scientific.net/AMM.376.190
Publication status	Published - 2013
Event	2013 International Conference on Mechanical, Automotive and Materials Engineering, CMAME 2013 - , Hong Kong Duration: 26 Jul 2013 → 27 Jul 2013

Publication series

Name	Applied Mechanics and Materials
Volume	376
ISSN (Print)	1660-9336
ISSN (Electronic)	1662-7482

Conference

Conference	2013 International Conference on Mechanical, Automotive and Materials Engineering, CMAME 2013
Country/Territory	Hong Kong
Period	26/07/13 → 27/07/13

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

AISI D2
Non-directional grinding
Plasma nitriding
Surface preparation

Access to Document

10.4028/www.scientific.net/AMM.376.190

Cite this

@inproceedings{fc4abec7206b4a7c95f7b96809f8815d,

title = "Effect of surface preparation by non-directional grinding on properties of AISI D2 plasma-nitride layer",

abstract = "This research studies the properties of plasma-nitride coating on AISI D2 tool steels prepared by non-directional grinding at various finishing. In the manufacturing process, the AISI D2 was machined to size and hardened with a typical hardening process. In addition, its surface was treated with plasma nitriding. Various levels of roughness were produced as well as possible affects on the nitride coating properties. In this study, the following five conditions of grinding were performed on the hardened specimens: 1-μm diamond particle and four SiC grinding papers: P100, P240, P800, and P2500. The surface finishing with at least 0.023-μm roughness value (P800 grinding) provided a plasma-nitride layer with a moderately good hardness profile and a thick nitride layer compared with other finer finishing. This finishing process was also more economical requiring less time and manpower to create than others. Overall, this study suggests that finer surface finishing has a tendency to significantly improve the tool steels hardness profile and hardened depth.",

keywords = "AISI D2, Non-directional grinding, Plasma nitriding, Surface preparation",

author = "S. Rajsiri and T. Kraiha and L. Plangklang and U. Chairue",

year = "2013",

doi = "10.4028/www.scientific.net/AMM.376.190",

language = "English",

isbn = "9783037858073",

series = "Applied Mechanics and Materials",

pages = "190--194",

booktitle = "Materials and Diverse Technologies in Industry and Manufacture",

note = "2013 International Conference on Mechanical, Automotive and Materials Engineering, CMAME 2013 ; Conference date: 26-07-2013 Through 27-07-2013",

}

Rajsiri, S, Kraiha, T, Plangklang, L & Chairue, U 2013, Effect of surface preparation by non-directional grinding on properties of AISI D2 plasma-nitride layer. in Materials and Diverse Technologies in Industry and Manufacture. Applied Mechanics and Materials, vol. 376, pp. 190-194, 2013 International Conference on Mechanical, Automotive and Materials Engineering, CMAME 2013, Hong Kong, 26/07/13. https://doi.org/10.4028/www.scientific.net/AMM.376.190

Effect of surface preparation by non-directional grinding on properties of AISI D2 plasma-nitride layer. / Rajsiri, S.; Kraiha, T.; Plangklang, L. et al.
Materials and Diverse Technologies in Industry and Manufacture. 2013. p. 190-194 (Applied Mechanics and Materials; Vol. 376).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Effect of surface preparation by non-directional grinding on properties of AISI D2 plasma-nitride layer

AU - Rajsiri, S.

AU - Kraiha, T.

AU - Plangklang, L.

AU - Chairue, U.

PY - 2013

Y1 - 2013

N2 - This research studies the properties of plasma-nitride coating on AISI D2 tool steels prepared by non-directional grinding at various finishing. In the manufacturing process, the AISI D2 was machined to size and hardened with a typical hardening process. In addition, its surface was treated with plasma nitriding. Various levels of roughness were produced as well as possible affects on the nitride coating properties. In this study, the following five conditions of grinding were performed on the hardened specimens: 1-μm diamond particle and four SiC grinding papers: P100, P240, P800, and P2500. The surface finishing with at least 0.023-μm roughness value (P800 grinding) provided a plasma-nitride layer with a moderately good hardness profile and a thick nitride layer compared with other finer finishing. This finishing process was also more economical requiring less time and manpower to create than others. Overall, this study suggests that finer surface finishing has a tendency to significantly improve the tool steels hardness profile and hardened depth.

AB - This research studies the properties of plasma-nitride coating on AISI D2 tool steels prepared by non-directional grinding at various finishing. In the manufacturing process, the AISI D2 was machined to size and hardened with a typical hardening process. In addition, its surface was treated with plasma nitriding. Various levels of roughness were produced as well as possible affects on the nitride coating properties. In this study, the following five conditions of grinding were performed on the hardened specimens: 1-μm diamond particle and four SiC grinding papers: P100, P240, P800, and P2500. The surface finishing with at least 0.023-μm roughness value (P800 grinding) provided a plasma-nitride layer with a moderately good hardness profile and a thick nitride layer compared with other finer finishing. This finishing process was also more economical requiring less time and manpower to create than others. Overall, this study suggests that finer surface finishing has a tendency to significantly improve the tool steels hardness profile and hardened depth.

KW - AISI D2

KW - Non-directional grinding

KW - Plasma nitriding

KW - Surface preparation

UR - https://www.scopus.com/pages/publications/84885711788

U2 - 10.4028/www.scientific.net/AMM.376.190

DO - 10.4028/www.scientific.net/AMM.376.190

M3 - Conference contribution

AN - SCOPUS:84885711788

SN - 9783037858073

T3 - Applied Mechanics and Materials

SP - 190

EP - 194

BT - Materials and Diverse Technologies in Industry and Manufacture

T2 - 2013 International Conference on Mechanical, Automotive and Materials Engineering, CMAME 2013

Y2 - 26 July 2013 through 27 July 2013

ER -

Effect of surface preparation by non-directional grinding on properties of AISI D2 plasma-nitride layer

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this