Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB

S. P. Lakshman Rao; Ciji Pearl Kurian; B. K. Singh; Kumar Abhinav; Gaurav Nandy

doi:10.1109/ICAECT.2014.6757095

Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB

S. P. Lakshman Rao
, Ciji Pearl Kurian
, B. K. Singh
, Kumar Abhinav
, Gaurav Nandy

Manipal Institute of Technology

Research output: Contribution to conference › Paper › peer-review

9 Citations (Scopus)

Abstract

As a result of rising concern of global warming and the depletion of fossil fuel reserves, many are looking at sustainable energy solutions to preserve the earth for the future generations. Environmentally friendly solutions are becoming more prominent than ever as a result of concern regarding the state of our deteriorating planet. This paper presents one of the alternate ways for the power generation, which is clean and economical for the future generation. The two sources which are used for power generation are solar and wind. DC output of photovoltaic panel and rectified dc output of Wind energy conversion system(WECS) is fed to the boost converter which is operating in closed loop in-order to maintain constant output power in any environmental condition. It consists of wind turbines with permanent magnet synchronous generator (PMSG). The output of boost converter is feed to the common dc link which is connected to the 3 phase Sinusoidal pulse width modulation (SPWM) inverter, which converts its dc input to 3 phase AC output. Simulated 2KW solar and 3.2KW wind hybrid system. The simulation of whole hybrid model is done in SIMULINK/MATLAB.

Original language	English
Pages	241-247
Number of pages	7
DOIs	https://doi.org/10.1109/ICAECT.2014.6757095
Publication status	Published - 2014
Externally published	Yes
Event	2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014 - Manipal, India Duration: 23 Jan 2014 → 25 Jan 2014

Conference

Conference	2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014
Country/Territory	India
City	Manipal
Period	23/01/14 → 25/01/14

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy
SDG 8 Decent Work and Economic Growth
SDG 13 Climate Action

Keywords

3 Phase SPWM Inverter
Boost Converter
SIMULINK/MATLAB
Solar Energy
WECS

Access to Document

10.1109/ICAECT.2014.6757095

Cite this

Lakshman Rao, S. P., Kurian, C. P., Singh, B. K., Abhinav, K., & Nandy, G. (2014). Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB. 241-247. Paper presented at 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014, Manipal, India. https://doi.org/10.1109/ICAECT.2014.6757095

@conference{068b1e185ce9480c916b3bf99719a02c,

title = "Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB",

abstract = "As a result of rising concern of global warming and the depletion of fossil fuel reserves, many are looking at sustainable energy solutions to preserve the earth for the future generations. Environmentally friendly solutions are becoming more prominent than ever as a result of concern regarding the state of our deteriorating planet. This paper presents one of the alternate ways for the power generation, which is clean and economical for the future generation. The two sources which are used for power generation are solar and wind. DC output of photovoltaic panel and rectified dc output of Wind energy conversion system(WECS) is fed to the boost converter which is operating in closed loop in-order to maintain constant output power in any environmental condition. It consists of wind turbines with permanent magnet synchronous generator (PMSG). The output of boost converter is feed to the common dc link which is connected to the 3 phase Sinusoidal pulse width modulation (SPWM) inverter, which converts its dc input to 3 phase AC output. Simulated 2KW solar and 3.2KW wind hybrid system. The simulation of whole hybrid model is done in SIMULINK/MATLAB.",

keywords = "3 Phase SPWM Inverter, Boost Converter, SIMULINK/MATLAB, Solar Energy, WECS",

author = "\{Lakshman Rao\}, \{S. P.\} and Kurian, \{Ciji Pearl\} and Singh, \{B. K.\} and Kumar Abhinav and Gaurav Nandy",

year = "2014",

doi = "10.1109/ICAECT.2014.6757095",

language = "English",

pages = "241--247",

note = "2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014 ; Conference date: 23-01-2014 Through 25-01-2014",

}

Lakshman Rao, SP, Kurian, CP, Singh, BK, Abhinav, K & Nandy, G 2014, 'Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB', Paper presented at 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014, Manipal, India, 23/01/14 - 25/01/14 pp. 241-247. https://doi.org/10.1109/ICAECT.2014.6757095

Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB. / Lakshman Rao, S. P.; Kurian, Ciji Pearl; Singh, B. K. et al.
2014. 241-247 Paper presented at 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014, Manipal, India.

Research output: Contribution to conference › Paper › peer-review

TY - CONF

T1 - Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB

AU - Lakshman Rao, S. P.

AU - Kurian, Ciji Pearl

AU - Singh, B. K.

AU - Abhinav, Kumar

AU - Nandy, Gaurav

PY - 2014

Y1 - 2014

N2 - As a result of rising concern of global warming and the depletion of fossil fuel reserves, many are looking at sustainable energy solutions to preserve the earth for the future generations. Environmentally friendly solutions are becoming more prominent than ever as a result of concern regarding the state of our deteriorating planet. This paper presents one of the alternate ways for the power generation, which is clean and economical for the future generation. The two sources which are used for power generation are solar and wind. DC output of photovoltaic panel and rectified dc output of Wind energy conversion system(WECS) is fed to the boost converter which is operating in closed loop in-order to maintain constant output power in any environmental condition. It consists of wind turbines with permanent magnet synchronous generator (PMSG). The output of boost converter is feed to the common dc link which is connected to the 3 phase Sinusoidal pulse width modulation (SPWM) inverter, which converts its dc input to 3 phase AC output. Simulated 2KW solar and 3.2KW wind hybrid system. The simulation of whole hybrid model is done in SIMULINK/MATLAB.

AB - As a result of rising concern of global warming and the depletion of fossil fuel reserves, many are looking at sustainable energy solutions to preserve the earth for the future generations. Environmentally friendly solutions are becoming more prominent than ever as a result of concern regarding the state of our deteriorating planet. This paper presents one of the alternate ways for the power generation, which is clean and economical for the future generation. The two sources which are used for power generation are solar and wind. DC output of photovoltaic panel and rectified dc output of Wind energy conversion system(WECS) is fed to the boost converter which is operating in closed loop in-order to maintain constant output power in any environmental condition. It consists of wind turbines with permanent magnet synchronous generator (PMSG). The output of boost converter is feed to the common dc link which is connected to the 3 phase Sinusoidal pulse width modulation (SPWM) inverter, which converts its dc input to 3 phase AC output. Simulated 2KW solar and 3.2KW wind hybrid system. The simulation of whole hybrid model is done in SIMULINK/MATLAB.

KW - 3 Phase SPWM Inverter

KW - Boost Converter

KW - SIMULINK/MATLAB

KW - Solar Energy

KW - WECS

UR - https://www.scopus.com/pages/publications/84897510972

U2 - 10.1109/ICAECT.2014.6757095

DO - 10.1109/ICAECT.2014.6757095

M3 - Paper

AN - SCOPUS:84897510972

SP - 241

EP - 247

T2 - 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014

Y2 - 23 January 2014 through 25 January 2014

ER -

Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB

Abstract

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this